P16i

Ultimate all-in-one fault locating system 16kV

The P16i is the ultimate all-in-one solution for troubleshooting, pre-locating and pinpointing of cable faults in complex cable networks up to 15kV. Menu guided computerized operation allows to detect and precisely locate various faults for even inexperienced users. Featuring a large color 10,4” screen, the P16i can display measurement curves, test results and message codes simultaneously. Integrated full scale TDR capability in combination with the high voltage arc reflection

mode (ARTi) will isolate and pre-locate low as well as high resistance faults with utmost precision. As a result precise pinpointing will take much less time. The fast HV surge pulse cycles of 3 sec. with up to 2000 Joule energy support the most demanding locating jobs while the multi-dimensional safety system ensures maximum safety for instrument and operator. The optional pin-pointer Kamphone and Locator S are used for flash-over faults or cable sheath faults.

 

APPLICATIONS & FEATURES

  • Comprehensive fault locating in underground cable networks;
  • Optimal for 6 to 15kV cable systems;
  • Covering full cycle from trouble-shooting to isolating and precise fault pinpointing;
  • One central unified control unit for all measurement modes and settings;
  • App-style based user interface for easy operation;
  • Rotary encoder operation for precise parameter setting;
  • Multilayer protection & safety system;
  • Possibility to upgrade to fully equipped cable test van.
  • Integrated & Automatic System
  • High 1000 Joule Multi-Range Output
  • Portable With Low Weight

 

SAFETY FEATURES:

STANDARD:

  • Integrated emergency switch off & safety key lock
  • Guarded Discharge Technology
  • Faulty ground conditions monitor (FU/EP

OPTIONAL:

  • Separation transformer
  • Extra residual voltage monitor

Analysis & test of faults:

IR mode (opt.) 10kΩ to 200MΩ @ 5kV
HV DC mode 0 to 18kV
Isolation of faults:
TDR range 90km
TDR impulse / widths 160V / 50ns to 10µs
TDR resolution 0,2m
TDR impedance matching 25 to 1600Ω
Pre-location TDR-LV mode 1-phase over HV cable
Optional 3-phase over LV cable
Optional Intermittent Fault Scanning
Pre-location TDR-HV mode ARTi: 16kV (Arc Reflection)
Optional SCC: 16kV (Surge Current)
Optional DVC: 18kV (Decay Voltage)
Fault conditioning 500mA
Optional 1,5A @ 12kV
Mapping of faults:
Surge voltage levels 8/16kV
Surge energy 1000J (per level)
Optional add-on 2000J (per level)
Surge mode pulse range 2000J @ 3s to 10s; single shot
Sheath pinpointing (opt.) 0 to 12kV; 1:3, 1:6, 3:1, 6:1
GENERAL DATA
Dimensions 430 x 516 x 875mm
IP rating IP43
Weight 80kg
Mains supply 230V, 50Hz
Operating temperature -10°C to +55°C

 

SCOPE OF SUPPLY

P16i (Basic)

Set of connection cables (5m) incl. cable bag

FU/EP sensor kit

User manual on CD

 

OPTIONS

Pinpointer: Kamphone & Locator S Standard Trolley

Rugged Version (IP54) with rugged Trolley [pictured]

Connection Kits: 25m or 50m (HV+LV)

P16e without TDR and ARTi

Related Products